FAQs

How to use FTP

Model
All
Category
Useful
Views
512
Storpia, which is connected to wired or wireless network, can send data by using FTP program.

(In the guide, the explanation is based on FTP program called Filezilla.)

[Note]
When Storpia is connected with wired connection, you have to check Storpia's IP address first. Please check FAQ bulletin board.

1. Start the FTP program. Type the Storpia’s IP address to address tab of the server that will be connected. The IP address for wireless network is 10.10.10.254. Enter ID and password. The default ID and password are admin and admin. You don’t have to enter the port.
Function-4_1&2

2. You can see that Storpia is connected. You can use it in same method with different FTP server.
Function-4_3
[Note]
If it is not connected with methods that are shown above, check if FTP function is activated. You can check it from Storpia application’s Storpia Settings - Service menu.
Function-4_Note